FRP Coating

FRP Coating makes onto the surface of various products. And use in the leak-proofing of rooftops, factory floor, chemical industries, anti-corrosion treatment plants, concrete tanks, pipe fittings, and much more. It helps to protect from corrosion, chemicals & salts. It provides excellent performance. And a long-lasting time.

Procedure of FRP

There are several procedures for coating of FRP. And they are,

Check and make appropriate roughness for the surface.
Make sure the surface is dry.
Filling with the plate
Filling with resin.
Providing fiberglass over resin
Finishing top coat.

These procedures for coating of FRP makes with great care. The entire FRP coating process to carry out in a controlled environment. This makes a strong bond between the plate materials with resins and fibers.

1. Fill the plates where the pipes and rooftops need to leak proof.

Filling the plates where the pipes and rooftops of the building to repair are the first steps. In this, the rooftops are carefully cover or seal tight with plates. These plates to be cut to a required size and shape according to repair areas.

2. Filling with Resin

Filling with resin is the second step in the FRP coating process. Fill the top surface of rooftops which needs to protect from corrosion with resins.

3. Laying Fiber Glass

The third step in FRP coating is laying fiberglass. Lay the fiberglass over the resin carefully.

4. Finishing

Finish filling with plates, resin, fiberglass on the surface of rooftops.

Advantages of FRP coating

The advantage of fiberglass is that it easily mold into any shape.

cost-effective
Design Flexibility
Non-conductive
Durable
Corrosion Resistant
Eco-Friendly

HEALTH AND SAFETY

This process cause skin irritation. Wear helmets, safety shoes, Nose Mask, safety glasses, rubber hand gloves. The entire FRP coating process to carry out in a controlled environment. This makes a strong bond between the plate materials with resins and fibers.