Quality

civil techniques

Chicken Mesh Properties

abbu riyaz 1 May, 2023

Chicken Mesh Properties discusses in this post. In Construction of RCC structures, after casting of columns, beams and slab, the walls raises. Brickwork or Block work makes to fill space in-between columns, beams and slabs in outer sides. And to make all kinds of partition walls inside buildings. After brick or block work, plastering works performs.

Concretes have a property of expansion and contraction. It expands in heat and contract on cooling. The gap between RCC Structures and walls joint fills with fixing Chicken Mesh before plastering. It fixes on the connection surface of columns, beams and walls.

This reduces the chances of cracks occurring in walls in future. And it acts like reinforcement use in concrete. It makes the plastering strong at joints and junctions.

This uses maximum in interiors because of major pipelines for electrical conduits and water lines comes in interior walls. It Prevents the cracks occurring because of electrical conduits laying inside wall by grove cutting. The miss handling of switchboards cause electrical conduit damages resulting in formation of cracks on walls.

And all waterlines going inside these walls makes little vibrations because of water pressure. And miss handling of water taps causes water pipe lines damages resulting in formation of cracks on walls.

Chicken Mesh Properties

This Chicken mesh is hexagonal in shape. And possess a structure of honeycomb. This property makes it strong. And it gives a long life. It is a made of galvanized iron.

This manufactures in coils. It cuts in running maters as per length requires. And minimum 100 mm in width. If this cuts in one place while placing or after plastering, it wont make any damages in plastering. This chicken wire mesh is flexible in structure. This makes it ideal for using in curves and all kinds of plastering. This is available in Rolls of bundles. The Length is of about 10 m to 100 m. And as per usages / require length. It has a width of 1 meter to 2.5 meter. And it possess various gauges.

It is available in different materials like, in Ms and galvanized iron. The mesh size also varies. And it is available in different wire diameters. The gaps between hexagonal wire mesh varies. It varies from 13 mm to 50 mm.

civil techniques

Chicken Mesh in Plastering

abbu riyaz 1 May, 2023

Chicken Mesh in Plastering uses to prevent cracks. Concretes have a property of expansion and contraction. It expands in heat and contract on cooling. The gap between RCC Structures and walls joint fills with fixing Chicken Mesh before plastering. It fixes on the connection surface of columns, beams and walls.

In Construction of RCC structures, after casting of columns, beams and slab, the walls raises. Brickwork or Block work makes to fill space in-between columns, beams and slabs in outer sides. And to make all kinds of partition walls inside buildings. After brick or block work, plastering works performs. The column sides touching walls hacks properly. Hacking is a process of making smooth concrete surface rough. This provides a strong bonding between RCC surfaces, walls and Plastering.

Chicken Mesh in Plastering

This mesh is hexagonal in shape. And possess a structure of honeycomb. This property makes it strong. And it gives a long life. It is a made of galvanized iron. This manufactures in coils. It cuts in running maters as per length requires. And minimum 100 mm in width.

It prevents the development of cracks between wall, column, beam joints and junctions. This reduces the chances of cracks occurring in walls in future. And it acts like reinforcement use in concrete. It makes the plastering strong at joints and junctions.

Chicken mesh uses in interior plastering. This uses maximum in interiors because of pipelines for electrical conduits and water lines comes in interior walls. It Prevents the cracks occurring because of electrical conduits laying inside wall by grove cutting. The miss handling of switchboards cause electrical conduit damages resulting in formation of cracks on walls.

And all waterlines going inside these walls makes little vibrations because of water pressure. The miss handling of water taps and fittings causes water pipe lines damages resulting in formation of cracks on walls.

And it uses if the plastering thickness is more than 15 Cm. It is not uses in plastering lesser than 15 Cm. Because it causes hair cracks if the thickness of plastering is less.

In exterior plastering this chicken mesh is not used. It has a chance of creating rust in it. If any rust forms in it, then the plastering will fall. It is only supposed to fix the mesh only if the thickness of plastering more than 20 mm.

civil techniques

Procedures for Testing Height of Bricks

abbu riyaz 1 May, 2023

Procedures for Testing Height of Bricks is explains in this post. Bricks have different sizes & Dimensions. It possess plain rectangular faces with sharp edges or corners. And it possess uniform colour on all faces.

The main requirement of brick is that it has to free from, cracks, flaws. And free from foreign materials present inside it. The Physical dimension of brick is consider as major aspect.

Bricks possess standard dimension. There are two major types of bricks,

Modular Bricks and
Non-Modular Bricks

Standard Modular Bricks

The standard Modular Bricks has different dimensions compares to Non-Modular Bricks. The size of standard Modular Bricks are 190 mm length,110 mm width and 90, 40 mm height.

Standard Non-Modular Bricks

The standard Non – Modular Bricks has different dimensions compare to Modular Bricks. The size of standard Non-Modular Bricks are 230 mm length, 110 mm width and 70,30 mm height.

For making a uniform bond in-between bricks, Standard Modular Bricks and Non-Modular Bricks combines.

Procedures for Testing Height of Bricks

Collect Twenty Bricks Randomly of same Consignment or same brand.
Make sure It is free from damages, cracks, etc,.
It must possess plain surface with proper size and sharp edges.
Cut all extrudes or projections on sides of bricks.
It must possess same colour throughout without any irregularity on each faces.
Keep Twenty bricks in flat level ground surface.
Arrange twenty bricks straight in height.
It must be in contact with face of bricks in Height.
Make sure there is no gap between bricks for measuring the length.
Measure bricks with a Measuring tape.

Tolerance for Height of bricks

A tolerance of 40 mm provides for height of Standard Modular Size brick. For twenty bricks the height is 1.8 M +/- 40 MM. ( 1.760 to 1.840 MM )

A tolerance of 40 mm provides for height of Standard Non-Modular Size brick. For twenty bricks the height is 1.4 M +/- 40 MM. ( 1.440 to 1.360 MM )

civil techniques

Procedures for Testing Width of Bricks

abbu riyaz 1 May, 2023

Procedures for Testing Width of Bricks is explains in this post. Bricks have different sizes & Dimensions. It possess plain rectangular faces with sharp edges or corners. And it possess uniform colour on all faces.

The main requirement of brick is that it has to free from, cracks, flaws. And free from foreign materials present inside it. The Physical dimension of brick is consider as major aspect.

Bricks possess standard dimension. There are two major types of bricks,

Modular Bricks and
Non-Modular Bricks

Standard Modular Bricks

The standard Modular Bricks has different dimensions compares to Non-Modular Bricks. The size of standard Modular Bricks are 190 mm length,110 mm width and 90, 40 mm height.

Standard Non-Modular Bricks

The standard Non – Modular Bricks has different dimensions compare to Modular Bricks. The size of standard Non-Modular Bricks are 230 mm length, 110 mm width and 70,30 mm height.

For making a uniform bond in-between bricks, Standard Modular Bricks and Non-Modular Bricks combines.

Procedures for Testing Width of Bricks

Collect Twenty Bricks Randomly of same Consignment or same brand.
Make sure It is free from damages, cracks, etc,.
It must possess plain surface with proper size and sharp edges.
Cut all extrudes or projections on sides of bricks.
It must possess same colour throughout without any irregularity on each faces.
Keep Twenty bricks in flat level ground surface.
Arrange twenty bricks straight in width.
It must be in contact with face of bricks in width.
Make sure there is no gap between bricks for measuring the length.
Measure bricks with a Measuring tape.

Tolerance for Width of bricks

A tolerance of 40 mm provides for width of Standard Modular Size brick. For twenty bricks the width is 1.8 M +/- 40 MM. ( 1.760 to 1.840 MM )

A tolerance of 40 mm provides for width of Standard Non – Modular Size brick. For twenty bricks the width is 2.2 M +/- 40 MM. ( 2.240 to 2.160 MM )

civil techniques

Procedures for Testing Length of Bricks

abbu riyaz 1 May, 2023

Procedures for Testing Length of Bricks is explains in this post. Bricks have different sizes & Dimensions. It possess plain rectangular faces with sharp edges or corners. And it possess uniform colour on all faces.

The main requirement of brick is that it has to free from, cracks, flaws. And free from foreign materials present inside it. The Physical dimension of brick is consider as major aspect.

Bricks possess standard dimension. There are two major types of bricks,

Modular Bricks and
Non-Modular Bricks

Standard Modular Bricks

The standard Modular Bricks has different dimensions compares to Non-Modular Bricks. The size of standard Modular Bricks are 190 mm length,110 mm width and 90, 40 mm height.

Standard Non-Modular Bricks

The standard Non – Modular Bricks has different dimensions compare to Modular Bricks. The size of standard Non-Modular Bricks are 230 mm length, 110 mm width and 70,30 mm height.

For making a uniform bond in-between bricks, Standard Modular Bricks and Non-Modular Bricks combines.

Procedures for Testing Length of Bricks

Collect Twenty Bricks Randomly of same Consignment or same brand.
Make sure It is free from damages, cracks, etc,.
It must possess plain surface with proper size and sharp edges.
Cut all extrudes or projections on sides of bricks.
It must possess same color throughout without any irregularity on each faces.
Keep Twenty bricks in flat level ground surface.
Arrange twenty bricks straight in length.
It must be in contact with face of bricks in length.
Make sure there is no gap between bricks for measuring the length.
Measure bricks with a Measuring tape.

Tolerance for length of bricks

A tolerance of 80 mm provides for length of Standard Modular Size brick. For twenty bricks the length is 3.8 M +/- 80 MM. ( 3.720 to 3.880 MM )

A tolerance of 80 mm provides for length of Standard Non-Modular Size brick. For twenty bricks the length is 4.6 M +/- 80 MM. ( 4.520 to 4.680 MM )

civil techniques

Procedures for Testing Bricks

abbu riyaz 1 May, 2023

Procedures for Testing Bricks is explains in this post. Bricks have different sizes & Dimensions. It possess plain rectangular faces with sharp edges or corners. And it possess uniform colour on all faces.

The main requirement of brick is that it has to free from, cracks, flaws. And free from foreign materials present inside it. The Physical dimension of brick is consider as major aspect.

Bricks possess standard dimension. There are two major types of bricks,

Modular Bricks and
Non-Modular Bricks

Standard Modular Bricks

The standard Modular Bricks has different dimensions compares to Non-Modular Bricks. The size of standard Modular Bricks are 190 mm length,110 mm width and 90, 40 mm height.

Standard Non-Modular Bricks

The standard Non – Modular Bricks has different dimensions compare to Modular Bricks. The size of standard Non-Modular Bricks are 230 mm length, 110 mm width and 70,30 mm height.

For making a uniform bond in-between bricks, Standard Modular Bricks and Non-Modular Bricks combines.

Procedures for Testing Bricks

Preparation of bricks

Collect Twenty Bricks Randomly of same Consignment or same brand. Make sure It is free from damages, cracks, etc,. It must possess plain surface with proper size and sharp edges. Cut all extrudes or projections on sides of bricks. It must possess same color throughout without any irregularity on each faces.

Testing Procedure

Keep Twenty bricks in flat level ground surface.
Arrange twenty bricks it in a straight line for its various dimensions
It must be in contact with faces of bricks in length, width, height, respectively.
Make sure there is no gap between bricks for measuring the length.
Measure bricks with a Measuring tape.